Ask Experts Questions for FREE Help !
Ask
    chasheb's Avatar
    chasheb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2013, 08:00 PM
    Location on a 2006 ford f250 6,0 crank positioning sensure
    Were is the crank positoning sensor located on 2006 f250 6,0. I drovemy tuck this morning about 4 miles shut it off went to restart will not start
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 28, 2013, 06:49 AM
    It should be located off to the side and behind the crankshaft pulley. It will be held on by one 8mm bolt. Be sure to test all under hood and under dash fuses with a test light or multimeter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2006 ford f250 6.0 turbo diesel. Black smoke before turbo kick in [ 1 Answers ]

Just replaced head gaskets.installed stud kit,e g r elimitnator kit.new oil cooler.sent cyl. Heads to machine shop.had 7 new intake valves and 8 new guides installed.. also installed new flash tuner S C T . It allowed me to turn off check engine light for e g r delete kit.. and set up on...

2004 ford f250 6.0 runs till you cut off will not crank back [ 1 Answers ]

I have 2004 ford f250 runs until you cut it off then it will not crank back until you let it set for a long time

Location of fuel filter on 2006 ford f-250 [ 3 Answers ]

Where is/are the fuel filter/s located on a 2006 Ford F-250 6.0L Diesel?

2006 Ford F250 problems [ 2 Answers ]

My F250, 6.0 ltr, won't start when the motor is warm, What do I have to do?

2006 Ford F250 Check engine Light [ 1 Answers ]

Took my vehicle to local Ford Dealer, (check engine Light) 1st was told Bad Fazor, Fixed it Then Bad cam sensor (fixed it) was told Alternator (Fixed it) Just came on again. Every time I mean every time it comes on it is when I put it in reverse (at that second) it comes on. I read recently Ford...

View more questions Search