Ask Experts Questions for FREE Help !
Ask
    Stacy33's Avatar
    Stacy33 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 20, 2013, 07:18 PM
    Yard machine
    I took all the original wire out because there were a lot of bad ones.bypassed the ignition,put a push button start,but I don't know what to do with the two wires coming out of the carb.one ground to the block the runs under motor and comes out with the black wire that comes from the coil.I need to know what to do with both wires
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Mar 20, 2013, 08:14 PM
    Hi,
    One is probably run to the anti-backfire solenoid on the bottom of the carb. It needs to have 12V applied for the machine to run.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Yard machine will not start [ 1 Answers ]

Lawn machine will not start it cranks and on rare occasion it will start and run for a few seconds and then quit its getting fuel. New spark plugs gapped correctly and air gap set to .012.

Mtd yard machine [ 2 Answers ]

My MTD 14.5 hp yard machine has been hard to start for a while. Turn the key and back off several times before it will start.. I replaced the ignition switch and the solenoid and now it does not even make a sound. What else could it be.

Yard machine will not start [ 0 Answers ]

I have a yard machine 13hp has new battary,spark plug and new gas.will turn over but will not start. If one can please help thanks

17.5 hp yard machine [ 1 Answers ]

I have a 17.5 hp mtd yard machine. Can anyone tell me how to take the mowing deck off so I can change the blades?

View more questions Search