Ask Experts Questions for FREE Help !
Ask
    southdakotaron's Avatar
    southdakotaron Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2013, 08:04 PM
    Reconverting Coleman G8C furnace
    I need to reconvert a Coleman G8C furnace from Propane to NG - I can not find what part numbers I need to reconvert it back, the conversion was done before I purchased it. Can you help?

    Kind Regards

Check out some similar questions!

Coleman furnace [ 8 Answers ]

I have a coleman furnace. The burner will turn on but shuts off after about one minute before reaching desired temp. Any idea why?

Coleman furnace heat setting for coleman evcon furnaca modeld g a 207 5800 [ 0 Answers ]

Where is the heat anticipator setting for a coleman evcon furnace model dga2075800

Coleman Furnace [ 8 Answers ]

I Have a problem on a Coleman furnace, model # DGAA070BDTA. The problem is when the furnace kicks on, it lights the hot surface ignitor and lights the burner, but as soon as the fan comes on the burner shuts down and cycles about 5 times then shuts down. I have changed the board 2 times, replaced...

G8C furnace blowing cold air [ 5 Answers ]

I have a G8C forced air furnace with a diagnostic indicator saying the limit switch is open (4 blinks). If I am looking at the circuit board diagram correctly it looks like the limit switch is a little red dual on/off switch in the upper left corner of the circuit board. The other switch appears...

Coleman furnace [ 2 Answers ]

I have a new coleman furnace with a circuit board and the blower will not shut off after the burners cool off.. What will cause it to run all the time and not shut off. Gene

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.