 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Please explain in detail what happens when the thermostat is turned up. It would be best if you could have someone else turn up the thermostat while you are at the furnace.
Often there is a circuit board, either in the area of the burners or in the blower compartment which may have a blinking light on it. If you find such, count the blinks between pauses. The key to the blink code is usually on the board or on the inside of the blower door. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an Amanda High Efficiency 80 gas furnace. Gas only burns for about 4 or 5 seconds then shuts off. I have to reset everything but it just does the same thing... any ideas ?
Hello Everyone, Can anybody tell me if my Amana 80 SSE furnace has a Thermalcouple? My furnace started cutting out last night and I started asking around and a couple people told me that's what might be the problem. Someone else told me that my type of furnace doesn't have a Thermalcouple, but...
How can I access the AC coils on the inside of furnace to clean them?
When the temperature was high in the past days, I noticed that Air conditioner takes a long time to cool. The AC is working. How do I check if the fan is working ?
We have an Amana furnace, model guc115c5oc, which does not stay lit. The unit will ignite, and then you hear several clicks ( which seem to be caused by the flame sensor for the rollback feature), and then the flame will turn off. It will try this about three times, and then the flame will shut...
View more questions Search
|
