Ask Experts Questions for FREE Help !
Ask
    Ali Aboutaleb's Avatar
    Ali Aboutaleb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2013, 10:48 AM
    Air handler
    I have Air handling unit with two inlet water and two outlet, I want to know how to install it with header which coming from chiller. It has only one coil
    nvdragon1's Avatar
    nvdragon1 Posts: 16, Reputation: 4
    New Member
    		  
    #2

    Mar 16, 2013, 10:36 PM
    I believe the coil you have is for both heat and cooling.. one side is for chilled and other is for heated water . So if there overlaped (inside the box) that's what it is, if there side by side ( doughtful) then you need to split both and tie them in that way.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air conditioner r 410 new old r22 air handler and coils replaced [ 0 Answers ]

I have a new ac compressor R 410 but my air handler and coils are r 22 need replaced. I have talked to 3 companies that said I do not have to replace the compressor and one company that says I have to change the compressor.

I think my air handler drip line is clogged & I do not have compressed air. [ 3 Answers ]

This is a follow up on my other air handler question. I do not have compressed air to blow out the drain line. Is there anything else I can personally do besides call the a/c company.

Air handler won't run, just an unusual hum from the air handler. [ 0 Answers ]

My sister in law tried to install a new thermostat and has somehow messed something up. I went over and her Trane air handler will not run. I found that the glass bus fuse beside the transformer was blown. I replaced the fuse and I still get nothing except the hum from the transformer. I...

Air handler works fine but compressor will not shut off. Air is cold. [ 1 Answers ]

I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.

Snappy air handler return air support box [ 0 Answers ]

I need a Snappy air handler return air support box with filter and drawer The one I want is a Standex SBFD-36. Can someone point me in the direction to buy this thing online?

View more questions Search