Ask Experts Questions for FREE Help !
Ask
    d shopbell's Avatar
    d shopbell Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 13, 2013, 11:32 AM
    Hunter fan light
    I wasn't clear on my last post. In the light housing I have 4 white 4 black 1 blue 1 brown and 1 grey . The blue, brown, and grey are on the switch. I need to know how to wire them all.

Check out some similar questions!

I have a Hunter ceiling fan w/light ineed to know how all the wires in the light conn [ 1 Answers ]

I need to know how all the wires connect in the light housing. There are four lights in the housing 11 wires to connect

Installing a hunter ceiling fan & light control to operate my fan w/light [ 3 Answers ]

I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...

Hunter remote controlled fan -- light is working, but fan is not; 5 years old? [ 2 Answers ]

Hunter Park Hill Type 2 - Remote LED light on, but Light/Fan not working? [ 2 Answers ]

Remote Control LED light is on, but the Hunter Park Hill Type 2 Model 20578 Light or Fan will not work... why?

Wiring hunter fan and light /light to 3 way and fan to on off wall switch [ 4 Answers ]

I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.