Ask Experts Questions for FREE Help !
Ask
    mfrench's Avatar
    mfrench Posts: 10, Reputation: 2
    New Member
    		  
    #1

    Mar 9, 2013, 11:08 AM
    York GY9S 10 red flashes
    Wondering what are some common things that could cause my gas valve to be energized without call for heat?

Check out some similar questions!

York diamond 80 red light on circuit board flashes 4 times. [ 2 Answers ]

York gy9s shaky [ 1 Answers ]

Got two YORK GY9S furnace/air conditioner Tubular Exchanger Series. Our home used to be a duplex. One unit began rattling/shaking and it is getting worse. The feeding pipes are visually shaking when the unit is running the air conditioner. I had the original installer look it over and diagnosed...

York furnace (GY9S/GM9S/GF9S) Not working - 3 Red flashes on Diagnostic [ 5 Answers ]

Hi, We have a york furnace up in the attic to heat the bedrooms. We had a major wind condition one day and the furnace stopped working after that. It has the three red-light diagnostic red blinks, which means either the - Faulty pressure switch, broken pressure switch hose, blocked vent...

I have a york furnace, flash code is 12 flashes [ 0 Answers ]

I have a york furnace model gy9s060b12up11k. Flash code is 12 flashes. The burner fan comes on then clicks off. Igniter does not come on but blower fan stays on. No heat. Any ideas?

York board flashes 5 times [ 10 Answers ]

York gas apck model #D3GA024N04206A fan runs continuously even with thermostat off unless I pull the power but will not ignite. Board is flashing 5 times. The small fan that runs to pull the gases out before ignition is running and I have air coming through the house vents, just no ignition and no...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.