 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Day and night plus 80 furnace 33 / 12 Code
My furnace ignites, heats for a couple minutes, the blower does not come on, it shuts down then flashes a 33 code than a 12 code. I have pulled the wires off the limit switch and held them together to bypass, pulled out the switch and tapped it but when I try to fire it up, it just goes into 12 code. What's up?
|
||||
Check out some similar questions!
Day & Night Plus 80 error code 31
[ 0 Answers ]
Heater works one day and not the other. Installed new thermostat no change. Upflow Model 395CAV042091
My day and night heater is malfunctioning and I am getting a 14 code? How do I fix th
[ 0 Answers ]
Day and Night gas heater a/c. Getting error code 14, which references me to 34 code.
Day and night furnace
[ 1 Answers ]
It keeps running even after it reaches the desired temp
Day and night furnace
[ 1 Answers ]
I have a day and night furnace. When turned on at certain temp, it will light up and Shut. Tries to light up but no avail. Pilot will come on but seems there is no gas. Makes noise.
A code 31 on I believe a Day and Night 80 plus forced unit
[ 7 Answers ]
I am on propane which was down to 30% yesterday but is full today. My problem is my heat will not come on, the fan works in the on position. The LED flashes a 31 . I have replaced the thermastate and checked the breakers and fuze and they are OK. I just don't know where to go from here. I am...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
