Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to replace moen O-rings on a kitchen faucet
[ 6 Answers ]
In want to know how to replace o-rings on a moen kitchen faucet. This faucet has separate valves for hot and cold, so I don't believe there is a cartridge involved.
Kitchen faucet O-rings failing
[ 1 Answers ]
American Standard Connoisseur faucet leaks between the top of the spout hub and the bottom of the handle cap. Have replaced O-rings twice since house completed in Mar 2003. How long should they last with "normal" usage? Spout is very stiff to move from side to side. Is this normal? I try not to...
Kohler Kitchen Faucet
[ 6 Answers ]
I have a Kohler pull down faucet in my kitchen. The areator needs to be cleaned. How do I remove the screen. I can't see any way to grab hold of it and I'm not sure how much removes--just the screen or do the spray nozzles move also?
Kohler Kitchen Faucet
[ 1 Answers ]
I have a Kohler single handle with sprayer, kitchen faucet. The hot water is just a small drizzle. I called and they sent out a spacer assembly. That did not solve the problem, in fact there was now NO hot water. Called again and they sent out new hoses and the brass connector at the handle end,...
Kohler kitchen faucet
[ 3 Answers ]
I have a Kohler kitchen faucet, model K-10412, I think. Because of leaks I am trying to replace the o-rings for the spout. Everything I have seen says that the spout should just lift off after the bonnet nut is removed. Mine doesn't. It moves about 1/4 inch and won't move any further. Can you help View more questions Search
|