 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1991 1500 sierra won't start
Truck makes a loud clunk noise when I turn ignition. Did it a couple times but started but now it won't. Already replaced alt, water pump and last year the starter. The drive belt look a little damaged could that cause it? It's a v8 automatic
|
||||
Check out some similar questions!
After replacing the ICM my truck cranks but won't start?
I have a 1982 chevy C/K 1500 V8, 305 I just replaced the fuel pump, and I cannot get the truck to run. When the carburetor is full of fuel, it will catch and run until that fuel is out. After that though, it will not catch. I checked the hard lines from the tank to the pump and I have no fuel,...
My car seemed to run out of gas on the highway (sputter, die, coast then restart- repeat). I put some gas in it and it wouldn't restart. It has spark in all four cylinders, and its getting fuel under pressure (I checked the banjo bolt). Gave it a new distributor just in case, still wouldn't start....
My truck will not start. I have changed the fuel pump and it still won't start. It has spark and turns over but will not start. Anyone have any ideas on what it could be
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
