Ask Experts Questions for FREE Help !
Ask
    MERCG27's Avatar
    MERCG27 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 6, 2013, 04:40 PM
    Hampton Bay Ceiling Fan Parts
    I Have a Hampton Bay ceiling fan model #AC-552AL it has to light fixtures (1) at the top & (1) at the bottom. It was working fine. I replaced the light bulbs and now absolutely nothing works. Nor the fan nor either of the lights... Can you please help!
    scott53715's Avatar
    scott53715 Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Mar 7, 2013, 04:51 PM
    Do you have an electrical tester? Check and see if you have power at the wall switch. Do you use a remote control? If you do, is there any way the dip switches could have been moved? The light kit is attached to the fan with a couple of screws. You can disconnect the kit and check and see if the wiring harness is connected firmly. You've lost power and finding the bad connection can take time, especially if you have to check connections under the canopy at the ceiling (you'll have to remove the fan blades first (unless you have a down rod). Check for a blown fuse, or breaker on the fan's circuit. If simply wiggling things to change a bulb has caused everything to stop working one of the wire nut connections may be bad. Hope this was helpful.
    jim tweedie's Avatar
    jim tweedie Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 8, 2013, 11:53 AM
    Quote Originally Posted by scott53715 View Post
    Do you have an electrical tester? Check and see if you have power at the wall switch. Do you use a remote control? If you do, is there any way the dip switches could have been moved? The light kit is attached to the fan with a couple of screws. You can disconnect the kit and check and see if the wiring harness is connected firmly. You've lost power and finding the bad connection can take time, especially if you have to check connections under the canopy at the ceiling (you'll have to remove the fan blades first (unless you have a down rod). Check for a blown fuse, or breaker on the fan's circuit. If simply wiggling things to change a bulb has caused everything to stop working one of the wire nut connections may be bad. Hope this was helpful.
    The only problem is that the globe that came with the fan is too dark.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Parts for Hampton Bay ceiling fan [ 6 Answers ]

Just got a hampton bay mediterranean 52in. Ceiling fan looking to change the glass housing and glass shade. Where do I get parts.

Hampton Bay ceiling fan parts [ 7 Answers ]

The light of my ceiling fan keeps blowing bulbs and one socket does not work at all. I need help to find repacement wiring with the sockets attached. I have had no luck on my own. Even went to the store where it was purchased.

Hampton Bay Ceiling Fan Parts [ 2 Answers ]

The fan is a FASCO Model No. RM995 purchased in 1992. I need to replace the bracket that attaches to the motor shft and supports the fan blades. The material used in the manufacture of the bracket is a composition material. Please advise if this bracket is avaiable and also the cost. . ...

Hampton Bay Ceiling Fan Parts [ 1 Answers ]

I have Hampton Bay 54" fan MOdel 523 127. The fan speed is always full on and can't be stopped or slowed down. The light control won't turn off the light unless I turn off power and then back on. Where's the problem: in trasmitter or receiver? I've changed the batteries in they are in...

Berlini Hampton Bay ceiling fan parts [ 1 Answers ]

I am in need of the blade holders for a Hampton Bay ceiling fan Model#729 395 anyone who has one for sale please contact me thanks

View more questions Search