Ask Experts Questions for FREE Help !
Ask
    choward1's Avatar
    choward1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 3, 2013, 06:15 PM
    Trane xb igniter intermittently lights
    Recently came home to find a cold house and the furnace was running and blowing cold air. The igniter glows but doesn't ignite the gas. I cleaned the sensor with sandpaper and it worked for another day before it started blowing cold air again. Sometimes it lights, sometimes it doesn't. I don't know a lot about HVac but I know when it's cold LOL. Appreciate any help you can give me, Thanks

Check out some similar questions!

Lights intermittently flicker in whole house. [ 15 Answers ]

Our lights intermittently flicker in whole house and have been doing so for about 3 weeks. Since it is intermittent, it took us a while to figure out what was going on and that it was not related to any appliance or the furnace. Week 2 we called the utility company and after 2 calls they came out...

My trane furnace blower fan stops intermittently [ 2 Answers ]

I have a 15 year old heat pump and electric furnace I am so proud of it lasting this long with no problems, but the blower motor will stop running about once a month usually when I most need it (meaning maybe it has stopped other times and I have not noticed it.) I can see the unit is still getting...

Trane XL80 igniter lights but no gas [ 3 Answers ]

Problem started when replacing house circuit panel, inadvertently tripped 100 amp circuit. It fried the board, I replaced the board igniter lights but no gas is coming through, did I fry something else.

Forced Air Heating - electric igniter lights up but no flames [ 1 Answers ]

Hi My home meating unit has a problem After turning on the thermostat, the electric igniter lights up for ~15 seconds but nothing happens, no flames , and than it shuts off, and tries again 1-2 minutes later. I've check the gas pipe and control that's in the 'on' positions. Could it be...

Maytag Dryer gets new coil set lights igniter then nothing [ 2 Answers ]

Maytag DG410 igniter lights then gas comes on but won't stay on , Replaced coil set but wires were not the same colors , so I matched the coils as they came out of the old coils ! The one coil clicks but no gas lights I know I have gas at the valve IT lit once before I changed the coils I may not...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.