Ask Experts Questions for FREE Help !
Ask
    bjrd1950's Avatar
    bjrd1950 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2013, 06:17 PM
    96 Sebring
    My 1996 Sebring is stuck in limp mode I have changed the output speed sensor and the ETAX relay and fuse with no change so I'm going to change the TCM. What I need to know is I have seen several of them on line with the same part # as mine but out of different cars will they work in my Sebrink the part # is o4606359.
    And will I need to have it reprogrammed.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Mar 4, 2013, 08:25 AM
    Even if the replacement is the same part number it will likely needs security matched once installed.
    Having said that, I wouldn't change another part that may or may not fix the problem until you have some idea what the problem actually is.
    Rather than spray your car with parts and hope something eventually fixes the fault, spend some of that hard earned money on a proper diagnosis.
    Spend a little to find out what is wrong and change just that part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2005 Chrysler Sebring Sedan. [ 1 Answers ]

Does a 2005 Chrysler Sebring Sedan have a cabin air filter? If so, where is it located?

1996 chrysler sebring [ 3 Answers ]

Hello everyone! First time user, desperate times... any way I have a real good question for some one that's smarter than me! Driving along the other day I noticed a slight miss I one of the cylinders, stopped at a signal light and when green hit I started to go then suddenly down to a sputter she...

Sebring (2-door) Lamborghini Doors. [ 3 Answers ]

I was just wondering if anyone knew of ANY place online to find lamborghini doors for a 1999 Chrysler Sebring. They're really hard to find, and I'm at my wits ends. My boyfriend's driver's side door shocks are currently not working, and in need of replacement. I'd really appreciate it. Thanks.

View more questions Search