 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite washer will not agitate
I have a Kenmore Elite washer m/n 110.23022100 that won't agitate. I have replaced the coupler and the problem is still the same. The coupler was not broken, just a bit worn. Even if I have the agitator removed it makes the same bad noises. Ideas?
|
||||
|
||||
|
Read this: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
And learn to use a meter. Buy a good meter and read this: https://dl.dropbox.com/u/8010163/How...e%20Manual.pdf You have been guessing, and that does not work in today's world. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 5 year olf Kenmore elite washer that does not spin/agitate or pump water. Took the shell off, pump off, motor off. I left the motor connected to the wiring, tried to spin/agitate, but get no motion on motor, just a buzzing noise. Seems like the motor is bad? Is there any way to test this,...
The washing machine runs fine except that the agitator does not turn. I hear the motor attempting to turn it, it sounds like a gear inside is stripped. Is this the problem and am I able to repair it?
Model 417.42142100. Front loading machine. Does not spin or agitate, drum will not operate. Everything else seems to work. Fills, drains, makes noise like it's working during all cycles.
My Knemore elite model number 110.20092993 will not agitate or drain. If you select drain and spin and then press select the time remaining indicator displays 9 minutes, shortly you hear a selonoid pick up but the unit will not spin. If you push cancel you will hear the selonoid relese and all...
I have a 110.20072992 that won't spin, agitate, or drain. I have walked through the diagnostic mode and get no activity except for getting water into the tub. I have scanned forums and run across possible solutions (coupling, controller board) but those are solutions for partial symptoms. I...
View more questions Search
|
