Ask Experts Questions for FREE Help !
Ask
    jchadwick12's Avatar
    jchadwick12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2013, 01:15 PM
    Problem with cold water at shower valve.
    I have to turn my cold water handle faucet in the shower almost all the way on before it comes out. How Can I fix this?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Feb 23, 2013, 03:46 PM
    Is this a tub/shower combo?

    What type of faucet? Named and model number?

    If you don't know name, post a picture.

    Then we will be able to help you.

    Chuck
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Feb 23, 2013, 05:00 PM
    How long has it been doing this, is it new?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No cold water in shower valve [ 0 Answers ]

Hi, I installed a pegasus shower /tub valve and trim in a house I own, the model is a few years old but never used.It is supposed to be one of their higher end models with the tub/ shower switch built into the valve. Also the valve itself is more complex than I'm used to there are the shut-offs...

Symmons Temptrol Shower Valve - Cold Water Only [ 2 Answers ]

I have several 10 year old Symmons Temptrol Model A shower units. One has recently stopped all hot water. A second is warm at best. I was told by a friend (not plumber) that I need to replace the mixer valve or the part that stopps scolding. The reason being is the part wears out and defaults to...

How Do I Set the Hot and Cold Water Setting on My Shower Valve? [ 2 Answers ]

I have installed a new handle on my shower at home. However, when I turn the handle to the left - the water is cold. When I turn the handle to the right - the water is hot. I have a Moen shower system. Can anyone help me so that the hot water is activated by turning to the left and the cold...

Replace cold water valve stem in shower [ 1 Answers ]

How hard is it to replace my cold water valve stem in my shower

Mixing valve tub/shower with no cold water [ 1 Answers ]

I'm flummoxed with a Delta, mid-1990's mixing valve. The valve has shut-off's via screw and locknut on cold and hot inlets, and I have good pressure there at both hot and cold side. But an inch-or-so away, at the main body holding the cartridge (I don't know the terminology, sorry), no cold...

View more questions Search