Ask Experts Questions for FREE Help !
Ask
    greenban's Avatar
    greenban Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2013, 11:42 AM
    Byrant furnace not working
    I have no heat . I turn on the switch,hold it in and then blower kicks in. led is blinking.no glow light.

Check out some similar questions!

Byrant furnace automatic ignition not working [ 0 Answers ]

Bryant furnace runs with blower but no flames, model 310AAV048110. Tried manual restart per instructions but auto ignition did not light. What is next? Susan

Dual fuel rheem furnace not working, defrost control board replaced still not working [ 1 Answers ]

Hello there, I have a Rheem furnace and is only one year old. Recently my furnace didn't come on so I had someone come out and look at it and it turns out it was the defrost board on the heat pump that was bad. I replaced the board with a new one and turned the system on and it worked on heat and...

Byrant furnace [ 4 Answers ]

I have a byrant furnace that went out. Checked the igniter put everything back together and it worked fine for about four hours. Now when the thermostat calls for heat the blower motor comes on but the draft motor will not come on or the thermocouple. The induced draft motor is only getting...

Byrant Plus 90 furnace will not relight [ 6 Answers ]

I have a 1987 Byrant Plus 90 furnace. The other day the wheel on the inducer motor lost a couple of blades. I replaced it installed a new wheel and the motor. Plugged everyhting in but the pilot light would not stay lit. I removed the cover cleaned the pilot light area and the gas orfices. The...

Byrant heater will not light [ 1 Answers ]

I have a bryant heater that will not light Model #394GAD036100. I think it s the ignitor as I had to relight it before but I am not sure

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.