Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell boiler zone valve
[ 0 Answers ]
I have my expansion tank replaced as it was full of water. There was heat for a few days and then there was no heat. . The plumber came back and replaced my zone valve model V8043G1018 and the plumber asked what temp. do I like the room temp. at? I replied 20 degrees C. I was not there to see...
Help with honeywell zone valve v8043e1012
[ 0 Answers ]
Two days ago my plumber moved my thermostat to a new position in our lower level (in-floor radiant). 36 hours later the temp had dropped 10 degrees. When looking at the zone valve (honeywell v8043e1012) the motor (a replacement) was very hot and when I pulled it off it keep running as long as the...
Honeywell zone valve
[ 1 Answers ]
What does the "manual" position of the Honeywell 4000 4850 001 zone valve do? Does it by pass the thermostat and not operate the valve so that the valve stays closed all the time?
Honeywell zone valve
[ 1 Answers ]
The valve does not open when I call for heat. The manual lever is stuck in one position and I am unable to move it in any direction. I have an older style valve which I suspect I have to replace. Will the new motorized valve mount to the old body or do I have to replace the body as well?
I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do?
[ 1 Answers ]
Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do? View more questions Search
|