 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troubleshooting a Intertherm Furnace
I have an Intertherm Electric Furnace and when it starts up it will not send out warm air. If I turn off the two breakers, in the front of the furnace, and turn them back on again it will usually start the heating process. Sometimes I have to turn them on and off two or three times before it starts heating. After that it works fine all day. What is the problem?
|
||||
Check out some similar questions!
Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...
I can't find the reset... its in lock mode...
1986 intertherm electric furnace<only blowing cool air on heat setting. I inspected the heat coils and they don't look broken
My furnace MMBA 090ABAR-01 with Ham Std 1018 series hot surface ignition continually goes through recycle of about two minets of running and 40 seconds of shut down. The actual burning seems to shut down after the blower comes on and then restarts and burns for something less than a minet. There...
My intertherm #e2eb-01sha electric furnace mostly just blows cold air. Sometimes however the heat works just fine. Also, anytime the blower is not running the furnace is hot so we have to turn off the safety disconnect. We have tried replacing the thermostat to no avail. Help please Michael
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
