Ask Experts Questions for FREE Help !
Ask
    fuzzydogg's Avatar
    fuzzydogg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2013, 09:39 AM
    Star delta motors
    A motor will start in star but trips the breaker when it goes into delta. The control circuit is still working properly. What might be the problem because it was working fine before

Check out some similar questions!

The star the Magi (Wise Men) saw also known as the Star of Bethlehem [ 1 Answers ]

The Magi were more than astrologers they were an actual tribe which dwelt in what we call nowadays Arabia and Iraq. There is also evidence that one "clan" repatriated to Turkey and others dispersed into Syria and western Iran. Not all Magi were astrologers. They were in the land of Parthia or what...

Question on thermodynamics and equilibria; delta G and delta G^o [ 0 Answers ]

I would like to ask a question about thermodynamics which we covered in the biochemistry lessons. D Go = - R T ln K If for example you take into consideration ethanoic acid <----->ethanoate + H+ and equilibrium constant for ethanoic acid is 1.7 x 10^-5. By the equation: D Go = - R T ln K (I...

Power consumption of AC Servo motors in comparison of Induction motors [ 0 Answers ]

Can anybody tell if we uses higher torque AC Servo motors in CNC machines, will the power consumption will be more or it will depend upon its cutting load?

I have a $20 bill that has star after the serial # IK 02286111 green star? [ 0 Answers ]

The $20 bill has #IK 02286111 star green. Under it K11. In the right corner under 20 G366. If you know anything about this please let me know. Thank you for your time.

Comparison between single phase motors & three phase motors [ 3 Answers ]

Why single phase motors draws more current than three phase motors

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.