Ask Experts Questions for FREE Help !
Ask
    loretta campbel's Avatar
    loretta campbel Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2013, 11:07 AM
    1986 ford bronco 2
    1986 ford bronco 2 won't start turn the key just clicks doesn't crank just clicks now it don't do that answers please
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Feb 1, 2013, 11:08 AM
    Check the battery for a full charge .
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #3

    Feb 1, 2013, 11:13 AM
    Right, sounds like the battery.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Feb 1, 2013, 01:22 PM
    Install a new battery, clean the battery terminals, and clean the cable connections. It's best to have the auto parts store charge the new battery, prior to installation--it saves your alternator. Alternators are battery maintainers, not chargers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1990 ford bronco [ 0 Answers ]

Does anyone know where I can find an entire steering column for a 1990 ford bronco?

Ford Bronco II won't Start - 1986 Model [ 3 Answers ]

Hello to All, I have a 1986 Ford Bronco II with the 2.9 fuel injected engine, it turns over okay, and I can hear the fuel pump running also, but it won't fire, This was an intermittent problem, but as of yesterday it won't start at all. Sometimes it will catch and run a little but very rough...

1986 Ford Bronco II wiper governor location [ 0 Answers ]

Where is the wiper governor located on my 1986 Ford Bronco II? Is it under the hood or under the dash or some place else? Wipers only run on high, I have already replaced the wiper switch, did not help.

1989 ford bronco [ 1 Answers ]

My name is bruce I've got a 1989 ford bronco 11 with a 2.9 litre my question is first the low oil light came on so I changed out the oil pump and put a mechanical oil pressure gauge on now when I first crank the motor iread about 50 psi but after about 20 minutes of running the pressure will drop...

View more questions Search