 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mars 4 wire blower motor 1/3 horse wire diagram
Replacing a ge 5 wire motor white, black, yellow, red, brown wires. Replacing it with a mars 4 wire black, red,yellow,blue. Don't know what to do with three wires. The brown and white from the furnace and the blue from the new motor ? Also the new motor has no white? The furnace is only used for the blower when called for, has a boiler hooked to it, don't want blower on high speed.
Pat |
||||
Check out some similar questions!
I ordered a Honeywell model S688A1007 Sail Switch which I intend to wire N.O. to the hot wire on a blower motor (120 volt, 57 watt, 60 Hz, Panasonic FV-20NLF1 WhisperLine 240 CFM In-Line Fan), like a light swith would be wired. No idea about amp draw on this blower. I'm not an electrician and need...
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
I bought a new blower motor for my furnace,The old blower motor was a 3 speed and new motor is a 4 speed.The place I bought it told me to hook up white on white,black on black,red on red.And leave the orange wire hanging.I have no high speed for the ac.Is there some where I need to install the...
I am rewiring a Rudd Heater Blower motor. 240v 3 speed motor and I am trying to wire it. It doesn't matter how I wire it, as soon as I hit the 240v breaker by the unit the motor runs. I have even disconnected the thermostat totally and the motor runs constant. I am not an electrician.(Obviously)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
