 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace blowing cold air not heat
Hi,
I got a Bryant furnace #394gad-gaw and its blowing cold air and no heat. I tried to turn off the gas and wait 5 minutes but that didn't fix it. Also when I turn it back on the fan starts up but does not light and I don't hear it trying to light up either.. not sure if I would hear that or not. My water heater is running so the gas is on. I read where some times furnaces need reset, how would I do that? It was working good this morning but not sure what happened. Id like to try everything possible before we call someone as we can't afford it, to be honest. Thanks Rob |
||||
Check out some similar questions!
The furnace that I have has the round thermos stat, when I turn it to 80 or up the furnace don't ignite, but if I. Go to the furnace it's a button to turn on manual, it start blowing. Now as the furnace is blowing its cold air coming out the ducks, an the pilot light is lit, what can I do?
My gibson gas furnace is blowing cold air. I turned the unit off and on and adjusted the thermostat. Still cold air is blowing
My thermostat is set for heat and is on auto butit was only blowing cold air I turned it off for about an hour and put heat on80 turned thermostat back on and now it is blowing hot air what can be wrong
Carrier split unit Model 58RAV055-GC Circuit Board at Furnace CES0110057-00 Natural Gas I am experiencing a problem with my heat. I have a programmable zones thermostat and noticed that the air was not coming out hot when it was suppouse to be. The temperature was set to 75 but the temperature...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
