Ask Experts Questions for FREE Help !
Ask
    di68va's Avatar
    di68va Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2013, 09:54 AM
    Removed water inlet valve and no water coming out of pipe
    My toilet tank doesn't fill. I removed the shut off valve and no water is coming through the pipe. I use pex. It has been there for 3 years almost. In the bathroom, the sink and tub works fine. Its just n water for the toilet tank.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 24, 2013, 10:03 AM
    If you are on a slab, the pipe may have been crushed by settling. If you are on a crawl or basement, look for a crimped pipe. They are supposed to use turning bend guides but I see PEX installed without them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Heater Cold Water Inlet has Hot water coming out [ 2 Answers ]

I have a.O Smith Gas Water Heater. It was installed in 1991 and still works great. I am wondering why the hot water comes out of the outlet ( inlet ) labeled COLD on the top of the heater. Of course the labeled hot water inlet is supplying the cold water. The shut off valve is also on the pipe...

What method can be used to check water inlet valve? [ 1 Answers ]

As above

I have a water inlet valve to a dishwasher that is leaking [ 0 Answers ]

I have installed a dishwasher and connected the inlet and outlet valves to the proper places. My only situation is that the inlet valve is leaking but not from the connectors, but from the end of the copper line. Is my only solution is to replace the whole copper line?

Connecting water hose from water inlet valve to ice maker. [ 0 Answers ]

I put in a new water inlet valve but the water line from the valve to the ice maker keeps slipping out. I push it in hard and it seems tight but several days later it comes out. What is the procedure to keeping it in tight? Thanks

View more questions Search