 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Plus 80 error code #14
I have a Plus 80 and the gas furnace keeps shuting off. The error code is #14 "Ignition lockout" and then it refers to code 34 "ignition providing failure" So about every 3 hours it shuts down and I have to shut the power off for a few minutes and then turn it on and then it works. I have changed the filter thinking that would help (not). In the mornings when I get up the house is 63 degrees "cold" Any Ideas?
rbapg |
||||
Check out some similar questions!
Model # 110 45976 400 After replacing the door lock F DL error code, it still gives the same code and won't start? Original problem sometimes door would not lock then it would, this time it started then stopped in middle of cycle with water left in tub and same code.
I need to know what I can do to repair the dryer there is two codes that come up. The most resent is an f26 but there is also a f1 code .could they be related? How many codes can it hold and does it reset if you unplug it? How would I go about diagnosing the problems father. I want to fix this...
Code 12 r-w closed. What does this mean
I have a carrier furnace flashing error code 31 which states: 31-Pressure, draft safeguard, or auxiliary limit (when used) switch did not close or reopened. How do I fix it?
Hi I have a dell inspiron 6000. Its about 2 years old. Windows xp. Recently the audio has disappeared. It has a yellow exclamation mark beside it in the control panel and says code error 39- missing or corrupted. I tried a couple of registry cleaners but it made no difference. I'm afraid to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
