Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How too add a extra 50 amps to my existing 200 amp service
[ 5 Answers ]
I have a 200 amp service in my house they recommend to add 50 amp more to be safe . Because I put a large addition on . I have 4.0 copper coming in to my box .from the weather head .
Hellow There! How to show a 400 amp service into two 200 amps panels/meters
[ 1 Answers ]
I am adding a new electrical service to an existing one in the city of chicago. And was asked that I have to add a 400 amps with multiple meters, however I will need only 200 amps metered for my service. I need to show a one line diagram for the inpector. Any help!
Pulling 100 amps of main 200 amp service
[ 9 Answers ]
I'm pulling 100 amps off my main house 200 amp service to my new Garage. It is an indoor run of 70 feet. What size wire do I need? Copper or Aluminum? How many conductors? If I run it in the joist space do I need to case it? Thanks Ron
Cost to upgrade from 100 amps to 200 amps and ground
[ 4 Answers ]
StanFortyMan has made a lot of sense about my needs in a home with a 100 AMP Service.. I would like to upgrade to 200 amps.. with some ground sockets(or whatever this is called) and put in more sockets... The house is 1300 square feet... does anyone have a guestimate of costs?? Thanks, Annie
Changing from 100 amps to 200 amps
[ 1 Answers ]
I have a gas water heater (40 gallon tank). I want to change it to an electric tankless water heater. I have read that I need 200 amps in the house to do this, but currently I have only 100 amps. The outside meter is located only about 25 feet away, but the lines are underground. What is... View more questions Search
|