 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Vanity light problem
Hello. I purchased a Hampton Bay 3-light vanity fixuture from Home Depot about 3 months ago. One of the lights is broken. I have tried numerous new bulbs and they all fail to work. The other two lights work well. What are possible causes for this problem? What are my options for repair? Thank you for your assistance with this matter.
-Mary |
||||
|
||||
|
Welcome Mary
Did the light work when first installed? The light socket could be bad. The wiring to the socket may be bad. The power line to that light may not be hooked up. Start at power line. Check to see if wire from lights are wire nutted together. Make sure nuts are secure. With a meter, check to see if power is going to base of light socket. If have power, socket needs to be replaced. Chuck |
||||
|
||||
|
Try this. With the power off and the bad bulb removed, look in the socket and pull up the little tab in the bottom. Lightly screw in a good bulb. If it works, leave it alone. If it doesn't, you either have a bad socket or a disconnected wire behind the light.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to install a vanity light. There are 4 green wires tied in a bundle, 4 black wires tied in a bundle, one loose green wire and one loose bare wire. The new light has one white wire, one black wire and one bare wire. I connected the wires and all I get is direct current to the fixture....
I am replacing an older style vanity light in a guest bathroom. The old light has a convenience outlet built into the light fixture base. The new light has only a black, white and ground wire. The painters removed the old light so I do not know how it was connected. The wires coming from the...
Hello, I have a major problem. The vanity light in my bathroom a few days ago just fell off the wall. It was cheap wood and the guy who we bought the house from put it in. Some things are strange in the house like the hallway plugin only will work with nightlights and such, vacuum will not...
Recently I changed the vanity light in the bathroom. When I turned on the light I realized the breaker had tripped. I reset the breaker and all was fine for a couple days... the breaker tripped again. So I reset it and the same thing... 2 days later it tripped. I removed the light and can find...
I have a six-bulb vanity light bar in my bathroom. One of the lights will not work even with a new bulb installed. How do I disassemble the light fixture to determine if there is a loose wire? I do not see any screws that hold the decorative piece in place, so any information on how these...
View more questions Search
|
