 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring a ceiling fan light 3way and fan separately
I have a three way switch located on 2 adjoining walls, 14-3 wire from each switch to ceiling box for fan, light. Power source 14-2 into ceiling box. Question is, I would like to have switches run the light and have the fan powered all the time and operate by pull chain, can this be done? If so, how would the wiring be connected.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Need a wire diagram showing how to hook up a ceiling fan using 4 3way switches to control ligth and fan separately from two locations with power coming into the fan Yesterday I asked for a diagram to wire 4 3way switches to a ceiling fan / light with one set of 3ways for the fan the other set...
I have a ceiling light/fan with red, black, white and green wires. The ceiling box has a black and neutral coloured wire. Which wires go where?
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
Am trying to rewire up a ceiling fan with light to ceiling box -- of course, like an idiot, I didn't write down how it was wired before, because, hey, how hard could this be, right? Ceiling box has these wires: 3 blacks, twisted together 3 white, twisted together 1 red 3 copper grounds...
I am replacing a ceiling fan that has 3 switches that control the light and 1 that controls the fan. I have 4 wires coming into the box for the fan (black, red, white and grnd). The new ceiling fan has a remote that has to 2 lead wires that are supposed to be connected to the source and 4 (2 for...
View more questions Search
|
