Ask Experts Questions for FREE Help !
Ask
    Trialnerror04's Avatar
    Trialnerror04 Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 20, 2013, 03:34 AM
    Tile Around Toilet Sinking
    Hello. I'm a new home owner (about two years in) and realized this week that the tiling around the toilet in my first floor bathroom is about 3 inches lower than the rest of the bathroom. No cracks anywhere, water on the ground, or bad smells around the toilet. Bathroom is part of an addition so can't check underneath the room to see for any flooding.

    Any idea what this could be? Thanks!
    jazzas's Avatar
    jazzas Posts: 38, Reputation: -3
    Junior Member
     
    #2

    Jan 20, 2013, 04:49 AM
    Hi sounds to me like the tiller cheated, when he put them on, be-Jesus have another look see if any tiles are cracked,
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Jan 20, 2013, 08:06 AM
    Hi Trialnerror

    I am unclear on the issue at hand here... ;)

    It sounds to me like you have been living in your home for two years and the tile has been the way it is now all that time, right? If so, then you are asking why there would be a drop in the area around your toilet and all I can tell you is that it must have been designed that way. In other words, the people that did this probably saw a way to save time/labor/money so they leveled the area and set the flooring and called it good (probably because the plumbing pipe was too low compared to the rest of the floor).

    This shouldn't be a problem if there is no leaking/cracked tiles or otherwise.

    Did I misunderstand the question?

    Mark
    Trialnerror04's Avatar
    Trialnerror04 Posts: 4, Reputation: 1
    New Member
     
    #4

    Jan 20, 2013, 09:04 AM
    Quote Originally Posted by massplumber2008 View Post
    Hi Trialnerror

    I am unclear on the issue at hand here...;)

    It sounds to me like you have been living in your home for two years and the tile has been the way it is now all that time, right? If so, then you are asking why there would be a drop in the area around your toilet and all I can tell you is that it must have been designed that way. In other words, the people that did this probably saw a way to save time/labor/money so they leveled the area and set the flooring and called it good (probably because the plumbing pipe was too low compared to the rest of the floor).

    This shouldn't be a problem if there is no leaking/cracked tiles or otherwise.

    Did I misunderstand the question?

    Mark
    Thanks for the response, I should have been clearer with my original question.

    The floor did seem to be level when we moved in two years ago, however over the last three weeks or so I noticed the small dip. I did peek under one of the tiles and there is no moisture there or foul smell so I'm hopping this is simply shody installation when completed previously and the tiles need to be properly installed again.

    Thanks again.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #5

    Jan 20, 2013, 03:53 PM
    Trial, in your first post you said the tiling around the toilet in my first floor bathroom is about 3 inches lower than the rest of the bathroom, but in your last post, you say it is just a small dip. 3 inches is no small dip. Can you please post some pics of the areas in question.
    Trialnerror04's Avatar
    Trialnerror04 Posts: 4, Reputation: 1
    New Member
     
    #6

    Jan 20, 2013, 04:06 PM
    Quote Originally Posted by mygirlsdad77 View Post
    Trial, in your first post you said the tiling around the toilet in my first floor bathroom is about 3 inches lower than the rest of the bathroom, but in your last post, you say it is just a small dip. 3 inches is no small dip. Can you please post some pics of the areas in question.
    Sorry misspoke at first, is not three inches more like half an inch if that.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #7

    Jan 20, 2013, 04:13 PM
    Okay, that sounds more reasonable. If no leakage, you may be okay. However, know that if and when you decide to have the tile work redone, you will most likely have to have the subfloor replaced also. No quick fixes here. If the toilet keeps "sinking" I would suggest having the complete floor redone. It may get a bit involved, but once done correctly, should last you many, many years.
    Trialnerror04's Avatar
    Trialnerror04 Posts: 4, Reputation: 1
    New Member
     
    #8

    Jan 20, 2013, 04:16 PM
    Quote Originally Posted by mygirlsdad77 View Post
    Okay, that sounds more reasonable. If no leakage, you may be okay. However, know that if and when you decide to have the tile work redone, you will most likely have to have the subfloor replaced also. No quick fixes here. If the toilet keeps "sinking" I would suggest having the complete floor redone. It may get a bit involved, but once done correctly, should last you many, many years.
    Thank you very much for the advice - it is greatly appreciated. Your right though if/when we decide to have fixed we will hire someone to redo the entire floor properly.
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
     
    #9

    Jan 20, 2013, 04:19 PM
    'Part of an addition' doesn't explain what is under the floor - a slab? Crawlspace? If slab and sinking, that means that the concrete around the toilet was left open and filled with dirt around the drain, but if it's a crawlspace, there is access somewhere. No floor hatch in a closet, or spot high up the wall in the full basement? If no crawlspace access, you could take the toilet up easily enough. Or just not worry about it unless you see more signs.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My tile is about 1/16 in above my toilet flange. Is this acceptable? [ 11 Answers ]

My plumber installed the new flange for a bathroom we are adding. Once the plywood and hardee board went down the tiles are appx. 1/16 in above the flange. This is before I even put down the thin set. Will this setup seal or do I need to add extensions to the flange?

How tile affects toilet rough in [ 3 Answers ]

I bought a new toilet that requires a 12" rough in. The distance from the tile (not the dry wall) is only 10.5-10.75 inches. The tile is about 1" thick. Can this toilet be installed or do I need to purchase a toilet with a shorter rough in requirement?

Sinking water level in toilet bowl & smell! [ 7 Answers ]

I am hoping someone can help me! This all started with an odor in a room that shares a wall with the bathroom. The bathroom, however, does not have an odor. The sewer vent goes through the wall in between, but I have cut into the drywall where the pipe enters the room and there is no smell. It...

Toilet installation after installing tile [ 2 Answers ]

The bolts? Aren't long enough for the toilet after laying tile. What do we do next?

Height of toilet flange above new tile [ 3 Answers ]

Hi! I am finishing a bathroom in my basement. How high does the toilet flange, which is PVC, need to be above the level of the tile we are going to install soon? Not sure how high to cut the pipe... :o


View more questions Search