 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...
Remote Control LED light is on, but the Hunter Park Hill Type 2 Model 20578 Light or Fan will not work... why?
I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...
Hello, I have a Hunter Fan Model 22788 which is a remote control Fan-Light Assembly. It is in a cathedral ceiling roughly 10-12 feet above the ground. There is two remotes: 1 monunted on the wall and a handheld one. The wall mount was really useless day one the hand held remote will only work...
My ceiling fan of about 18 yrs came with a special controller that required special wiring. I have the schematics for it. It involves black wire, blue wire and white wire. The switch for the light has croaked & won't turn off. The rheostat for the fan is a five speed dial similar to a dimmer...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
