 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
If the that is metal expansion (plenum) I hear before the fan comes on, is this something that can be corrected?
I have a goodman heating & air unit. The heater will not turn on. When I flick the switch for heat the exhast fan turns on, and that all. I've check the breakers, turned the a/c on and it works fine (blower come on). Also turned the switch for the fan from auto to on... blower comes on. Just not on...
My heater starts to blow air only, when the pilot turns on and the flames start to burn it the flames turn off right away. It does it over and over again it never warms up the house. What can this be?
My heater kicks on for about 15 seconds then turns off and the fan runs indefinitely, after a while the heater will kick on again and the same thing repeats. Meanwhile cool air from the fan is blowing in the house and the temp on the thermostate gets lower and lower. I've tried turning off the...
We have a Goodman Heater, GMT Series, that recently started to sound like it is struggling to turn on. The LED blinks three times when it is struggling and the panel says that according to the blinking, we should check venter pressure switch or vent blockage. It was eventually starting and would...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
