Ask Experts Questions for FREE Help !
Ask
    sanila nomar's Avatar
    sanila nomar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2013, 05:33 PM
    Can I mount a house panel in an exit corridor
    Are there any code (CEC or NEC) or design concerns with mounting a house panel in an exit corridor.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 16, 2013, 06:40 PM
    Are there any code (CEC or NEC)...
    Depends. Are you in Canada or the US?


    ... or design concerns with mounting a house panel in an exit corridor.
    What are you calling an "exterior corridor"?

    Can you post a picture of the area?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Updating service panel to 200 amp with feeder to 100 amp panel in old house [ 8 Answers ]

I currently in the process of converting 1000 sq ft of attached garage into living space while doing this we are updating electrical service to 200 amp new service, there is 100 amp service in the old part of the house which will remain but need to be sub paneled from the new 200 amp service. I...

Why can't I mount a "wall mount only" light fixture on the ceiling? [ 6 Answers ]

I have several light fixtures, 8 feet by 2.5 inches, brass cover for the base, candelabra base, 8 bulbs. I want to install them on the ceiling in my foyer (where I have a carousel collection). Printed on the metal base it says wall mount only. What do I have to do to safely mount them on the...

How to fish wires from attic into flush-mount breaker panel? [ 1 Answers ]

Background on the house: 1960 built single story tract home in Southern California. 5/12 roof pitch. Updated to 200 amp panel and all new copper wire in 2003. Service drop through roof into exterior wall to flush-mounted combo meter/breaker panel (between studs, covered by stucco siding), no...

Wiring from my house panel to my pole barn panel [ 1 Answers ]

I am going to be wiring my pole barn up soon and just need some help on the type of wire to use. In my house I have a 200 AMP service and plan on running a 100 AMP feeder from that panel to my subpanel in the barn. (Just under 100 Feet) I am going to run a 6 gauge ground, two 4 gauge...

32" flat Panel ILO TV - Able to wall mount? [ 1 Answers ]

I have a 32" "ILO" Walmart brand flat panel TV that I would like to mount on the wall however, in my numerous searches on the web, I can't find anyone that has mounted one of these. Most of the info from other owners is how the TV stopped working after a few months. Well, I guess I did not get...

View more questions Search