Ask Experts Questions for FREE Help !
Ask
    marcos_morales's Avatar
    marcos_morales Posts: 5, Reputation: 1
    New Member
     
    #1

    Jan 16, 2013, 03:37 PM
    I need to replace the shower arm. But it keeps turning
    I have a palm harbour mobile home. The shower arm itself needs replaced. But after I remove the flange and shower head. The arm itself will turn in circles. Its almost like there's a swivel om the arm and it keeps turning and won't come loose. Any ideas on how to remove this type of shower arm?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jan 16, 2013, 04:28 PM
    Unusual, show us a picture.
    marcos_morales's Avatar
    marcos_morales Posts: 5, Reputation: 1
    New Member
     
    #3

    Jan 17, 2013, 02:04 PM
    I will take one tonight thanks
    marcos_morales's Avatar
    marcos_morales Posts: 5, Reputation: 1
    New Member
     
    #4

    Jan 17, 2013, 06:18 PM
    Duh
    marcos_morales's Avatar
    marcos_morales Posts: 5, Reputation: 1
    New Member
     
    #5

    Jan 17, 2013, 06:47 PM
    OK here's pics
    Attached Images
         
    marcos_morales's Avatar
    marcos_morales Posts: 5, Reputation: 1
    New Member
     
    #6

    Jan 17, 2013, 06:49 PM
    The whole deal and the inside turns in circles but won't loosen.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #7

    Jan 17, 2013, 07:19 PM
    Speedball1 used to be a plumber for mobile home companies, he will likely come along with a fix
    fixitguy63's Avatar
    fixitguy63 Posts: 3, Reputation: 1
    New Member
     
    #8

    Mar 2, 2013, 10:56 PM
    I am going to have to fix mine too. I found out it has a nut and a large washer on the inside of the wall and the trim ring on the front side tightens up against it. I will probably have to cut out a small hole on the opposite wall to remove the nut and washer and install the new shower arm

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kohler 3 knob shower faucet keeps turning and turning on the hot water. [ 12 Answers ]

I have a 3 knob Kohler shower faucet in my bathroom. The hot water keeps turning and turning and doesn't stop. The water does turn on and off but it also keeps dripping. I have to play with it in order to prevent it from dripping as much as possible. How can I fix this? It is an older type Kohler...

Control arm bushings; replace both? [ 2 Answers ]

The dealer (on a recall for airbag visit) told me my control arm bushings are broken (lower); should I replace both upper and lower, since the work on the lower will be done anyway? And can you tell me if I can confirm them being broken myself, just by removing the tire. Same for the ball...

How do I replace a shower arm? [ 4 Answers ]

I have a 19 year old home with antique brass finish fixtures that I'd like to update to chrome. I have tried to change out the ancient, yellowed plastic handheld shower (broken handle and hose not long enough) however the shower arm has a ball at the end which will not release to allow me to...

I need help replacing a shower arm how far back into the wall does the shower arm go [ 3 Answers ]

I was going to replace my shower head when I realized there is no male end of the shower arm connecting to the showerhead instead there is a ball inside the showerhead that connects to the shower arm. There is no way to disconnect that from it. I wanted to try to replace the shower arm with a new...

My shower faucet keeps turning and turning. [ 4 Answers ]

Hi, my shower faucet has to be almost entirely turned around before it comes on. This just happened today. . Only the cold water.. is that a bad valve er something? Thank you in advance:(


View more questions Search