 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Air handler chirping
No error codes. Startup up sequence normal and all works normal except for 3 "chirps" prior to main blower startup. During the start after flame and right before the main blower turns on there are 3 "chirps" followed by main blower start and no more chirping. What does this mean? Thanks.
|
||||
Check out some similar questions!
This is a follow up on my other air handler question. I do not have compressed air to blow out the drain line. Is there anything else I can personally do besides call the a/c company.
My sister in law tried to install a new thermostat and has somehow messed something up. I went over and her Trane air handler will not run. I found that the glass bus fuse beside the transformer was blown. I replaced the fuse and I still get nothing except the hum from the transformer. I...
I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.
Is this a problem... just a very short chirp... I removed panel cover and could not find any charring or loose connections
Heat pump, Trane, late 80's vintage. To me a very typical heat pump. Air handler fan runs constantly. Turn up the thermostat, fan runs. Remove thermostat, fan runs. Disconnect the breaker fan turns off (duh). Reconnect the breaker with the thermostat high (no demand) the fan runs but the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
