 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the approriate way to set pipe joints for sanitary cast iron pipe in concrete? Is it best to go with hub-less or Hub and Spigot for cast iron joints that must be set in concrete?
My house is 100 years old. When I use my bathroom toilet and shower there is a tiny leak of water coming out of the cement wall around the cast iron pipe. The pipe runs straight down from the second floor. Is there a way to run a liner inside the waste pipe and not have to cut or replace the cast...
Well, I have dug out to the cast iron connection outside my stem wall and the concrete pipe seems to be cemented to the cast iron pipe. Any tricks to get this cast iron pipe cleaned up so I can connect the plastic pipe to it? Could I use a small chisel and chip away carefully so as not to break...
I am remodeling a bathroom, removed toilet saw wax ring removed wax ring saw cast iron pipe in floor raised up about a quarter inch above floor two rusted bolts that were screwed into cement floor to hold toilet down. I should mention that I have now removed the tile on the floor.The toilet had...
I am installing a new toilet. The original construction had a sub floor, which has been removed by the previous owner. Rather than properly seating the flange on the concrete floor, he put tile grout under it to compensate for the wood sub floor that was removed. The old toilet was sitting about...
View more questions Search
|
