Armstrong heating system code 8

aldan Posts: 2, Reputation: 1

New Member

Jan 7, 2013, 07:01 PM

Armstrong heating system code 8

Gas flame lites exhaust blower on air blower on . After 10 -15 seconds flame shuts down. After 4-6 min. system shuts down. Code 8 on led lite.

aldan Posts: 2, Reputation: 1

New Member

Jan 7, 2013, 07:03 PM

Yes

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Jan 8, 2013, 11:55 AM

Yes, I guess

Add your answer here.

Check out some similar questions!

How to fix a code 12 error on a bryant heating system [ 0 Answers ]

It's a bryant model #315aav048090 series b system the burners come on foe about a min. but than shut off as blower kicks in

Armstrong-Air Gas Fired Furnace G1D91AU NOT heating properly! [ 6 Answers ]

I have an Armstrong-Air Gas-Fired furnace G1D91AU and maybe a programmable thermostat. The system is around six years old and it has started causing me problems this winter. The system has been inconsistent when following the preprogrammed settings. It will NOT warm above 70 degrees no matter...

Converting forced hot air system to baseboard heating system [ 1 Answers ]

When considering converting from forced hot air to baseboard heat, is it possible to just add piping / water boiler / baseboards and do nothing with the forced hot air system (use it for AC) ?

Heating system isn't heating.. Is there a pilot that needs lighting? [ 1 Answers ]

I am renting a home that is 50 years old. It has recently turn cool, low 30s. If I turn the heating/air switch to heat and 70 + degrees. All I get is cool air coming out of the air vents. Can someone tell me what things I should do before calling heating specialist?