Ask Experts Questions for FREE Help !
Ask
    SteveRose's Avatar
    SteveRose Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2013, 11:45 AM
    Genie pro system does not repond to clicking on transmitter
    The transmitter light is on, I can hear the clicking sound but Even the light fails to go on. The motor is not locked as I can move it manually. Any ideas are appreciated
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jan 7, 2013, 11:15 AM
    Sometimes light will work and battery will be almost dead. Check it out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Genie pro 88 [ 0 Answers ]

Hi folks, I have an old Genie Pro 88 door opener without sensor, it will open OK but when I try to close it, it just tries to open further for a few moments then rests in the open position. I would appreciate anyone who has encountered a similar problem perhaps throwing some light on a fix? Thanks...

Genie pro 88 CLOSES but does not OPEN [ 5 Answers ]

My Genie Pro 88 closes, but does not open. I can hear clicking coming from the black little boxes (on the circuit board) and the lights come on, but it will not open. I also checked the jumper plug and the connection is perfectly fine. I also checked the grounding points and they are all secured...

Genie pro 88 [ 0 Answers ]

My Genie Pro 88 only opens and closes with the remote occasionally. I have cleaned the unit and tightened the screws. It works perfectly pushing the button, but with the remote it ddoesn't always respond. Can you please help me ?

Genie Pro 88 [ 0 Answers ]

I'm looking for a wiring diagram for the Genie Pro 88. Currently the 4-wire wall control (white, black, green yellow) and the remote signal receiver (12 pin) seem to conflict and stop each other from working because I don't have the wiring correct (just bought the house and the wires were...

Genie Pro 88 will not open electrically [ 2 Answers ]

I have a Genie Pro 88 Garage Door Opener. It had a hard-wired opener on the outside of the garage and I also had a portable opener that I kept in my car. Everything was working fine and then one day, I hit the button on the opener in my car & the Door opened only a little bit then went down. I...

View more questions Search