 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My kenmore elite 42922 won't drain or spin...
After someone washed their shoes in my front load washer it got stuck saying sud then I finally got it to open and took out the shoes. Now it won't do much. ItwItwon't spin or drain. I can start a cycle and at first it sounds like it's going to work but then it just does nothing ans after a few minutes it beeps and says f 2. Please help
|
||||
Check out some similar questions!
My Kenmore Elite Model 110.16982500 only makes a humming noise and will not drain or spin. Not an appliance guy and would like to avoid paying $200 to have someone come out and pull a switch and make it work... any ideas?
This 2002 Kenmore Top Series Washer will fill with water but will not agitate, spin or drain, just sits & makes a loud cranky buzzing noise. When dial is pulled out & moved to a different location & pushed back in. No change. Was there a recall on these washers if not then why not? Need to know...
Hello, I have a Kenmore Elite washer model 110.23032102 that, most of the time, does not spin when it gets to the rinse cycle. When it does spin on it's own (sometimes I can get it to spin by playing with the control know and moving it to the next spin cycle) it does not always spin enough to...
Model 110. 20072 991. We have a Kenmore that died this past Saturday. It started by just stopping on the spin cycle, but not the water won't drain either. I read on the site that something could be stuck in between the tub and drum. Not sure I am not techinally inclined when it comes to...
I have a 110.20072992 that won't spin, agitate, or drain. I have walked through the diagnostic mode and get no activity except for getting water into the tub. I have scanned forums and run across possible solutions (coupling, controller board) but those are solutions for partial symptoms. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
