Ask Experts Questions for FREE Help !
Ask
    aaronandelib's Avatar
    aaronandelib Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2007, 10:45 PM
    Quick and temp fix for cylinder lock 94 achieva
    My cylinder lock is broke and key won't turn ignition. Tried moving the steering wheel and key won't work. Have work in the morning . Is there a way to break, rig, etc... to fix till tomorrow so I can make it to work. The steering is locked too
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Mar 16, 2007, 04:46 PM
    Yes, taxi cab, public tranisit, thumb, friend or neighbor, rental, feet or bike. Just a few examples. But the car won't be rigged. Can guarantee that!
    hiperf402's Avatar
    hiperf402 Posts: 106, Reputation: -1
    Junior Member
    		  
    #3

    Mar 18, 2007, 04:00 PM
    Use a dent puller like a thief would and rip the guts out of it and use a screwdriver.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

'81 accord Ignition lock cylinder [ 2 Answers ]

I bought a replacement ignition lock cylinder for my '81 accord and was reading the instructions on how to change it out with the old one. Anyway, it said to insert the key and turn to the 'ON' position in order to line up the roll pin to disengage the old lock. If I had the key to turn the lock,...

Cylinder Lock Altima 97 [ 2 Answers ]

I need to replace the cylinder lock I bought for my Nissan altima GXE 1997 but it seems too difficult to do. I don't have the diagramas or schematics and the piece does not have intallation instructions. I'm doing this because my wife lost the ignition key and the locksmith charges over a 100 bucks...

Key won't turn after installing new ignition lock cylinder [ 1 Answers ]

Hi, I own a 1996 honda hatchback. My car required a new ignition lock cylinder. I ordered one off line and went about replacing it. I managed to get it installed. But my problem is after I connect the ignition switch to my new ignition lock cylinder my car won't allow me to turn my key all...

Temp gauge showing temp, 2001 Chev Malibu [ 13 Answers ]

I have a 2001 Chev Malibu LS, V6, temp gauge is not showing any heat at all, not registering when I know the coolant is hot ? Veh has about 126000 mi on it, never been flushed out, thought I would attempt to flush myself but don't you think the problem might be a bad thermostat ? If so, where and...

Question about supply temp. & return temp. [ 3 Answers ]

The AC system produced supply temps. At 57-60 degrees on the first floor With a return temp. of 71 degrees. The second floor supply temp. is at 59 degrees with a return temp. of 72 degrees. I know there should be at least a 15 degree temp. difference from the supply to return. There was also an...

View more questions Search