 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello all, I recently had two outlets installed on a new breaker, working fine. I have a smarthome remote control switch keypad which, needing a power feed, was connected to the end of the line. Now the outlets don't work, but the switch does. It's on a 15A breaker. Any ideas? HELP!
I'm replacing a kitchen light with 4 pot lights. The existing light was Power->Light->Switch To save ripping my entire ceiling down, I want to wire as follows: Power->L1->L2->Switch->L3->L4 Is this possible and/or permissible? I have it wired like this now but when I turn the switch to...
I have a switch box with power coming from an outlet. I had 14/2 running to a fan without a light. I replaced the fan with a new fan with a light kit. I replaced the 14/2 wire with 14/3 wire from fixture to switch box so I could control the light and fan from one switch. I cannot get the switch...
Motor Details: Manufacturer: FASCO Industries 70219565 Type: U218 Heater went out yesterday. The heater is not igniting and Im getting 2 blinks on the LED which indicates the end switch is open. It seems that the end switch is on the motor itself. Can I remove the switch or do I need to...
I'm not an electrician, but have successfully installed and run wiring for non-complex ceiling fans, so I have some skills. Forgive me if I don't use some of the terms correctly. The current issue I have is related to a three way switch. That three way switch is part of an upstairs/downstairs...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
