Ask Experts Questions for FREE Help !
Ask
    weiman2012's Avatar
    weiman2012 Posts: 16, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2012, 07:15 AM
    Wiring springloaded switch
    Can anybody tell me how to wire a springloaded lever switch.the one in question has 3 connectors on the side and 2 connectors on the bottom.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Dec 31, 2012, 07:29 AM
    It depends on what you want it too do. A limit switch? A safety switch? a Bypass? an override? And for what.
    You need to do some continuity test to see what makes and breaks, in each position.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a 3 way switch [ 1 Answers ]

I am trying to wire in a 3 way switch to my basement landing light that was originally controlled by a 2 way switch. That part I understand the problem I am having is that for my wires that go to the light I have a black and a red wire. My lights in the kitchen and living room are also controlled...

Wiring 3 way switch [ 1 Answers ]

I have four lights in an entry-way. I want to control the first light with a three way switch and the remaining three with another three way. I don't think the gentleman that wired it, did it right though. I have 3 2-wire cables coming into each switch box and only 1 3-wire cable. How do I connect...

Ceiling light wiring-1 dimmer switch and 1 wall switch [ 2 Answers ]

My new ceiling light has black,white and green wires. My ceiling box has 1 single black,1 copper, 2 white grouped together and 2black and a 1white grouped together. How do I connect my new light with only 3 wires to all the ceiling box wires. I have a dimmer switch on one side of the room and a...

Wiring ceiling fan switch and light switch [ 1 Answers ]

I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...

View more questions Search