 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Vintage Bobcat Snowblower Belt
I was given a Vintage Bobcat Snow blower , was my dads, then my sisters and now mine. I replace the fuel filter and spark plug and it starts on the first pull Yay! I used it and it starts to break down a little in high but other wise it worked all right. Only problem is the belt to the auger, it keeps slipping off, I need to locate a belt for this 30 year old machine... any suggestions?? I am in Ontario Canada
|
||||
Check out some similar questions!
I have a 1964 Bobcat snow blower made by Wisconsin Marine. I need to find a replacement belt for their #98 in the parts sheet. The belt is a V-Belt about 53.5 inches by 1/2. But it is very narrow on the tappered end.
I just acquired an Ultra by Murray 10 HP 29" snowblower. I need the belt that drives the impeller. Where do I go?
I have Sears snowblow (10 years old and works good)... however lately the belt just flies off the auger wheel - I've even replaced the belt so it's brand new... is there some adjustment that has to be looked at since the equipment is 10 years old? Thanks, Very annoying with 6" of snow outside
Just bought a MTD snowflite 10h 28 cut. Need to replce the belts, but do not have the manual or the spare part numbers , please advice how to take the belt out to go get a new one Cam
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
