 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter Ceiling Fan Switches
I have a 3-speed hunter ceiling fan and the chain broke. I need a switch + another small box-like part(capacitor?). How can I order both already connected to each other?
Please send response to [email protected] Thank you. Fred Zimmer |
||||
|
||||
|
Try this Hunter Fan - Online Ordering
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in one... I can get the light to work on the dimmer and or the fan and light on the dimmer but not the fan to work on the fan switch... I don't know where the blue wire coming out of the switch goes ...
I have just installed a hunter ceiling fan , but not sure how to install the hunter ceilng fan & light control ? I have a 3 wire coming from the fan , black , red , & white . On the switch there's a black , red , & a blue ? How does it get hooked up ?
From the ceiling is a tan, a red, a black and a ground that go to two switches on the wall. The fan has a black, a black with white, a ground and a white. The remote has a black, a red, two whites and a black with white stripe. Which do you connect to which? Thanks.
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
I replaced the pull chain switches on both my ceiling fan and light kit. When I pull the chain on the ceiling fan, it changes speeds but does not turn off. Same thing on my light kit... when I pull the chain, the light does not turn off. I have to turn them off by the light switch.
View more questions Search
|
