 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intermittent Pilot Module ICM2902
I have heating Lenox G20 Q4E-75-2. NEED REPLACE: Robertshaw Pilot Gas Ignition Module Model No. SP735L. Can I use ICM2902 IPI Gas Ignition Control to replace Robertshaw Pilot control? Seems like TR terminal is missing in ICM2902.
Thank you. |
||||
Check out some similar questions!
My problem with my Lennox furnace (model G23Q-3/4-100-2) is blowing cool air, and only occasionally heat was diagnosed as needing a Universal Pilot Module, part #53L9001 also known as 53L90. Question, if we purchase the part how difficult is the installation?
Hi Everybody, Am planning to install a pilot relight module on my old Lennox model furnace with no motherboard . What kind of module Do I need to go through this process without having a motherboard . I have seens kind of a metal T stat located very close by the ignition module box which I...
Can't seem to get honeywell s8610u replacement module to work. Original module was S8600. Installed as called for in instructions and will not ignite, but gas is present.Checked grounds etc. all OK. Removed module off second unit and installed on broken unit and it works good.
I have a 22 old Janitrol (goodman) furnace and my furnace guy, besides trying to sell me a new furnace, says the intermittent pilot control module need replaced as it sounds like it's not working properly (bouncing relay). My problem is he wants to charge an arm an a leg to replace it and I found...
Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
