 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No hot water in shower so I replaced moen cartridge 1222b and now it leaks
So my shower head doesn't get hot it only gets warm while the tub line does seem to get hotter than the shower head so I thought it was a cartridge problem. I ended up replacing my old moen 1222b cartridge with a new plastic one but now it leaks from the sides of the cartridge. I also noticed that the rubber parts on the side of the cartridge come off is this supposed to happen? Thanks in advance
|
||||
Check out some similar questions!
First my water heater blew so I replaced that. Everything was working fine until I took a shower in the master bath. I only had about 5 minutes of hot water. It's Moen and I had the cartridge replaced by a professional and it seemed OK... but now the problem is back. After the shower hot...
I have replaced the cartridge on a moen shower head valve but still only little water coming out but not hot water
I replaced the single cartridge moen faucet after the original jammed in the valve. Now I cannot get hot water. I tried a couple of new cartridges but have the same problem. Are there any settings on the cartridge that can fix this? Thanks.
Just replaced the Moen cartridge and still do not have hot water. When I turn the knob to hot the water does not even trickle out. Is the problem deeper than a cartridge replacement?
Hi Guys, I removed and replaced a shower single knob cartridge. I believe it was the 1225 but packet was a return at Home depot so wondering if I have the right cartridge. (Yes I chucked out the original cartridge so can't compare with new one now) The valve originally was leaking, so...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
