Ask Experts Questions for FREE Help !
Ask
    matthew 4756's Avatar
    matthew 4756 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 25, 2012, 10:32 AM
    Need to remove globe for a kitchen light
    XFINITY - Email currently unavailable

    Here is the picture of the globe
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Dec 25, 2012, 12:10 PM
    Matt,

    Please do not open another thread with a response. Just continue the original thread.

    I'll take a look at the picture in a few minutes right now Mr. Jameson and I are toasting in Christmas. I'm stuck in bed with pneumonia and a hot tottie.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Dec 25, 2012, 12:14 PM
    Matt,

    No picture. If you lood at the bottom of a text block you will see a button marked "Advanced" use that button to add your pictures.
    matthew 4756's Avatar
    matthew 4756 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Dec 25, 2012, 03:09 PM
    I did not see the advance that you mentioned but if you click on the top of the page where it says xfinety email is not available it will show you the picture or at least it does for me Happy Holiday to you also and have a speedy recovery
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #5

    Dec 25, 2012, 03:32 PM
    On my screen, the "Quick Answer" box, bottom right I have an "Go Advanced". Also on top of box there is an add imag tag.

    When I went to your link, there is no picture unless I'm doing something wrong.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #6

    Dec 25, 2012, 06:47 PM
    Matthew, I don't know how you are trying to show us the pic but I thin you are looking at your own e-mail account which is why only you can see it.

    The pic needs to be hosted somewhere and you just put the link to the pic in the box after hitting the [img] icon in the posting screen.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Remove the globe from a flush mount ceiling light [ 10 Answers ]

There is a domed shaped globe with a metal ring at it's base. There is no center thumb screw and no ring screws. I have tried to turn it but it moves a fraction of an inch in both directions and no more. I have slid a putty knife between it and the ceiling but I can't pull it down. Everything I...

How do I change the light /remove the globe in hampton bay fan windward II model? [ 10 Answers ]

Hello I have a Hampton Bay - pretty sure it is model #55295 (comes with remote forward/reverse) - the light just went out and I can't figure out how to get the globe off to change the light bulb. I swear we had a professor, an IT guy and another idiot (that's me) who should have collectively been...

Can't remove globe from ceiling light [ 11 Answers ]

We've had this light for several years, and just now all the bulbs are burned out. There is no visible way to remove the globe. There is about an inch between the ceiling and the glass, and there are three white plastic clip things. Two of them don't budge at all, and one moves just slightly, but...

Remove globe from light fixture [ 5 Answers ]

I have a chandelier with 6 lights . The globe covers are open facing down and after I remove the bulb , I see a thin round matal piece that has a small tab on each side. I was able to remove 1 metal circle by pinching the 2 tabs but I couldn't budge the globe. So I tried another light and couldn't...

View more questions Search