Ask Experts Questions for FREE Help !
Ask
    lht10903's Avatar
    lht10903 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2012, 06:30 PM
    mears electric heat thermostats
    The Mears 220v thermostat for our ceiling heat has (had) a resistor wired parallel with the leads going to the ceiling wires. The insulating sleeve disintegrated allowing the resistor to short against the metal case. There is nothing remaining of the resistor but powder. What was its value?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 17, 2012, 07:40 PM
    Crystal balls not that good. Google " Meer electric thermostat " for some hits.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mears thermostats [ 1 Answers ]

Need 5 covers for Mears M7 thermostats. Can anyone point me to the right Source? Thanks! [email protected]

Replacing old Mears m7-d thermostats [ 1 Answers ]

Picked up a programmable one but it was too big to fit back into the box. Had to settle for a basic dial-type. Any ideas/suggestions?

Mears thermostats? [ 0 Answers ]

I have a 40 yr. old Mears model #M7-D thermostat for an electric baseboard heater. What current model (programmable) is a good replacement? Thanks. RD

Electric Hot Water Heater still doesn't heat after replacing thermostats [ 2 Answers ]

Electric Hot water heater was working. Turned well pump off and went on vacation for three weeks. Got back and found I had no hot water. Call Whirlpool, their heater, they told me to replace both upper and lower thermostats after I gave them some voltage and resistive measurements. Replaced...

Mears Electric Heat Thermostats [ 1 Answers ]

We have moved into another house with electric heat. The thermostats are 220v double break by mears. When turning on the thermostats in each room, none of them indicate the true temperature according to the knob setting. When they click, that is the current temperature in the room. All are...

View more questions Search