Ask Experts Questions for FREE Help !
Ask
    JANAMARICE's Avatar
    JANAMARICE Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2012, 10:40 PM
    Furnace
    Can I get the " tonage" and btu's of my York compressor
    Model # G1FA0485S21A.

Check out some similar questions!

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

Tran furnace / air main blower on furnace will not run. But the a/c unit runs [ 0 Answers ]

Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not

Furnace burners ignite but won't stay lit on my trane xe78 furnace? [ 0 Answers ]

I have a Trane XE78 furnace and the flames come on for about 5-10 seconds and then shut off. They re-ignite about 10 seconds later, then shut off 5-10 seconds after the 2nd ignition. I believe they flame on one more time, shut off and then never re-ignite and the blower just runs and runs with...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Furnace Blower Motor Runs Constantly & Furnace or AC Won't Run [ 2 Answers ]

I have an Armstrong forced air (induced draft) natural gas furnace with central AC (made around 1990 -- Model: EG6H80DC14-1, Serial: A18315MNA). I had a problem at the end of the heating season where the blower motor would run continuously (even when the thermostat is turned to "off"). I thought...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.