Check out some similar questions!
Vent Damper for Microwave Range Hood Duct?
[ 13 Answers ]
I live in very cold winter climate and I am looking for ways to reduce loss of warm air. One obvious source is the over-the-range microwave vent. As far as I know, the only thing between the range vent and the outside is a chinzy little flapper on the microwave. It flaps in windy weather, which...
Painting the interior of a microwave
[ 8 Answers ]
Anyone have any information or thoughts about what kind of paint could or should be used to paint the interior of a microwave oven.
Drafty microwave OTR vent
[ 2 Answers ]
Help... cold outside air is drafting into my inner microwave and all around the outer cabinets. It is an Over the stove type.. an older whirlpool.. it appears to be vented up through the upper cabinet above it with a section of y-shaped galv. Duct that is taped with silver tape to a section of...
Installing over the range microwave with old vent
[ 4 Answers ]
Helo! We want to install an over the range microwave, where an old double oven GE range used to be. The cabinet above the new range has a huge hole with part of the old vent coming out. We are not sure what to do about this hole, or if a vent will be needed for a new microwave going in. We...
Gas line & dryer vent pipe - how close is too close?
[ 1 Answers ]
I'm rerouting the gas dryer vent piping so that it will inside the adjoining stud wall. At the top of the wall the vertical exhaust pipe will be within an inch or two of the horizontal running copper gas supply line. Question - is there a minimum distance that the metal dryer exhaust pipe must... View more questions Search
Add your answer here.
|