 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Slow speed
I have 120v to the outlet box (checked with meter) but when I put juice to anything, like a vacuum cleaner, the machine drags to start, like there is not enough electrical volts. I plug the vacuum into another outlet it fires right up. I took the outlet off and ran the main wires to the plug, same situation.
|
||||
Check out some similar questions!
My Federal Signal 2t22A air raid siren (now tornado siren) attains peak speed, 3,450 rpm, very quickly. 10 hp, 208-240/480. It is running on 240 V. at a small sewage plant next to my fire station. At 5,300 feet and low humidity, I assume the air does not impose the load on the rotors that it...
I have a Harbor Breeze 98120 ceiling fan. Is there a variable speed control that will run it very slow? I am doing an experiment and need 6 to 10 rpm. I have some electrical background.
For the EXPERTS I have a Goodman GMS8 furnace with air. The manual slow speed fan setting was never hooked up at the thermostat. I believe it is just a matter of jumpering the terminals to engage the slow speed fan. If this is correct what terminals (at the furnace) do I jumper on the circuit...
Hi everyone ! My son is 11 years old. His writing speed is too slow. Normally , copying one passage takes him more than one hour. How to improve it ? Thanks for your helps .
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
