Ask Experts Questions for FREE Help !
Ask
    electric4944's Avatar
    electric4944 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2012, 09:58 AM
    I have a american standard freedom 90 furance that won't start.
    Having problems finding in-line fuse.I have a white rodgers mother board.Will I find it there or in line with the supply line?

Check out some similar questions!

Fan won't shut off in American Standard Freedom 80 [ 0 Answers ]

Bought house summer 2010. A/C has been working fine since then until past wkend. Compressor turns on/off as thermostat calls, but air handler fan stays on continuously. Fan stays on after removing thermostat (Hunter) from wall. Replaced thermostat. Took access panel off air handler, found...

American Standard Freedom 90 4 blink code [ 3 Answers ]

I have an American Standard Single Stage Freedom 90 unit and just yesterday. It stopped blowing warm air. I have power cycled the unit and adjusted the thermostat and still nothing. The blower kicks on instantly and I don't see any spark or flame when looking at the venturies. My LED is...

Wire honeywell HE360 humidifier to american standard Freedom 90 single stage furnace [ 2 Answers ]

American standard won't ignite but blower runs [ 2 Answers ]

American Standard gas furnace. The thermostat calls for heat, and I can hear the system attempting to ignite the burners - On then Off... happens 2 or 3 times and the system gives up, but the system blower turns on and runs continuously until I manually reset the system by cycling the power.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.